Colours & Surfaces
We are leaders in surface finishes

Our products are galvanic plated with matt nickel from the very beginning. Nickel has a satin surface, pleasant to the touch, which is very popular among our customers. Since year 2000, we have applied titanium surfaces on most models in many shades by using technology of physical sputtering by low pressure plasma beam.

Titanium surfaces

The surface of the door handles and labels M&T is coated with a hard, chemically stable film using methods PVD and PACVD. This technological process is done under low pressure in vacuum chambers. In the PACVD (Plasma Assisted Chemical Vapour Deposition) process, the coating grows due to a heterogeneous chemical reaction on the surface of the substrate. The reacting substances are supplied in the gas phase. These gases are activated in low temperature plasma where molecules are dissociated and radicals, ions and excited atoms arise. It decreases the activation energy necessary for the chemical reaction so the reaction temperature can be lower. Moreover, the properties of the growing layer can be controlled by the variation of the plasma parameters. In the PVD (Physical Vapour Deposition) process, the coating grows due to deposition of atoms coming from a solid state target placed in the vacuum recipient walls.

A thin layer of 2 microns has several advantages, which make it so exceptional:

  • The extraordinary hardness … 7 times harder than handles with protective baked enamel
  • High resistance to abrasion and scratching … can not be damaged / scratched with normal use
  • Colours and chemical stability … the surface even after many years has the same colour
  • Corrosion resistance … quality applied coatings are only slightly microporous, which prevents the penetration of small particles to material of handle and thus the formation of corrosion
SNi matný nikl

SNi nickel matt

SNi-broušeno matný nikl broušený

SNi-nickel matt nickel matt grinded

Cr lesklý chrom

Cr glossy chrome

SNi matný nikl

SNi nickel matt

Galvanic plating on a brass product with satin smooth surface

  • production date.. 2 - 4 weeks
  • guarantee.. 3 years
  • using.. interiors
  • maintenance.. cleaner M& TITAN or SIDOL

close

SNi-broušeno matný nikl broušený

SNi-grinded nickel matt grinded

Galvanic plating on a brass product with hand - polished surface

  • production date.. 2 - 4 weeks
  • guarantee.. 3 years
  • using.. interiors
  • maintenance.. cleaner M& TITAN or SIDOL

close

Cr lesklý chrom

Cr glossy chrome

Galvanic plating on a  brass product with very high gloss surface

  • production date .. 3 - 4 weeks
  • guarantee .. 3 yars
  • using .. interiors and exteriors
  • maintenance .. cotton cloth or cleaner SIDOL

close

TiN-C titan chrom  mat

TiN-C titanium chrome matt

TiN-K titan černý  mat

TiN-K titanium black matt

TiN-B titan braun mat

TiN-B titanium brown matt

TiN-C titan chrom  mat

TiN-C titanium chrome matt

Phys sputtered surface with the widest using that of thanks to his gray / blue metallic shade, could find use in a wide range of buildings and projects with an emphasis on superior quality and design. This surface is also the hardest and most durable surface from the range of titanium surfaces and thus predestined for using outdoors and maximum frequented areas.

  • production date.. 4 - 8 weeks
  • guarantee.. 15 years
  • using.. interiors exteriors
  • maintenance.. cleaner M& TITAN

close

TiN-K titan černý  mat

TiN-K titanium black matt

Phys sputtered surface with the longest tradition - this is a black titanium, which we have applied to our products since 2000. During this time got the surface lot of fans, mostly investors of high buildings and luxurious interiors. This is not an ordinary black colour, but a metallic gray / black shade, which immediately assumed its structure and unmistakable metallic shade.

  • production date.. 4 weeks
  • guarantee.. 15 years
  • using.. interiors i exteriors
  • maintenance.. cleaner M& TITAN

close

TiN-B titan braun mat

TiN-B titanium brown matt

Phys sputtered surface specially developed for the fitting line DESIGN 2009. The changing surface passing through a spectrum of brown shades ending at the handle edges up with deep dark colors are difficult to define. Since an introduction in 2009 is its increasing popularity mostly among architects and clients with a sense of advanced design.

  • production date .. 4 - 8 weeks
  • guarantee .. 15 years
  • using .. interiors i exteriors
  • maintenance .. cleaner M& TITAN

close

TiN-S titan bronz mat

TiN-S titanium bronze matt

TiN-A titan mosaz mat

TiN-A titanium brass matt

NRz nerez - broušeno

NRz stainless steel – grinded

TiN-S titan bronz mat

TiN-S titanium bronze matt

Phys sputtered surface required wherever there is an emphasis on tradition, harmony with wood and other natural materials. 

  • production date .. 4 - 8 weeks
  • guarantee .. 15 years
  • using .. interiors i exteriors
  • maintenance .. cleaner M& TITAN
  • quantity condition.. only for orders over 50 pairs of fittings

close

TiN-A titan mosaz  mat

TiN-A titanium brass matt

Phys sputtered surface with a not random similarities with natural brass handle, previously extensively used and by M&T again included in the menu. Yellow / golden colour is a superior solution wherever there is a requirement to harmonize the unit in colours brass or gold.

  • production date .. 4 - 8 weeks
  • guarantee .. 15 years
  • using .. interiors i exteriors
  • maintenance .. cleaner M&T TITAN
  • quantity condition.. only for orders over 50 pairs of fittings

close

NRz nerez - broušeno

NRz stainless steel – grinded

Hand grinded surface on the stainless steel product with a soft grinded structure

  • production date .. 7 working days for rosettes fittings
  • guarantee .. 5 years
  • using .. interiors i exteriors
  • maintenance .. maintenance free or cleaner M& titanium

close

MS mosaz natural

MS natural brass

MS-L mosaz  leštěno

MS-L polished brass

Cr-K černý chrom  natural

Cr-K black chrome natural

Ms mosaz natural

Msbrass natural

Mechanically treated surface on a  brass product with a soft texture and colours, which is sensitively complemented with nature wood whether original or modern structured. The surface gets old naturally with the surrounding material and changes its colour according to weather conditions. Great investment with a lifetime guarantee.

  • production date .. 3 - 4 weeks
  • guarantee .. .. lifelong !
  • using .. interiors exteriors
  • maintenance .. maintenance free, cotton cloth or cleaner SIDOL 

close

Ms-L mosaz leštěno

MS-L brass polished

Mechanically polished surface on a brass product with a high-gloss surface, which gradually gets a patina and matt. Surface gets naturally old and changes its colour and appearance according the frequency of opening - in busy places stays glossy in others can be matt with a darker shade. Each piece is original with a different ageing process and other visual colours. Great investment with a lifetime guarantee.

  • production date .. 3 - 4 weeks
  • guarantee .. lifelong !
  • using .. interiors exteriors
  • maintenance .. maintenance free, cotton cloth or cleaner SIDOL

close

Cr-K černý chrom  natural

Cr-K black chrome natural

Galvanic plating on a brass product with a pretreated surface with a soft structure that meets the challenging requirements for modern architecture as well as for the  traditional style of the building. The matt black surface of the highest quality.

  • production date .. 4 - 6 weeks
  • guarantee .. 5 years
  • using .. interiors exteriors
  • maintenance .. maintenance free, cotton cloth or cleaner SIDOL

close

St-Z staré železo

St-Z antique iron

St-Z staré železo

St-Z antique iron

Surface treatment with a long-term process for forged handles. Forged fitting is processed by using a unique technology developed many years ago. Ageing of the iron can be achieved in a natural way, without using coloured paints.

  • production date .. 3 - 6 weeks
  • guarantee .. 5 years
  • using .. interiors exteriors
  • maintenance .. maintenance free, cotton cloth 

close

close

M&T Sample kits of surface finishes

We prepared a clear sample kits with all M&T surface finishes to show our customers what we can apply to our products. That should not be missed by any M&T dealers.

more